Suspended Solids and Sludge Concentration Meter
Measurement principle
SS-H4180 suspended solids and sludge concentration meter working principle:the light waves emitted by the sensor transmitter undergo absorption, reflection, and scattering by the measured object during transmission, with only a small portion of the light reaching the receiver.
- Product Introduction
Measurement principle
SS-H4180 suspended solids and sludge concentration meter working principle:the light waves emitted by the sensor transmitter undergo absorption, reflection, and scattering by the measured object during transmission, with only a small portion of the light reaching the receiver. The transmittance of the transmitted light is proportional to the concentration of the measured wastewater, and the concentration of the wastewater is calculated by measuring the transmittance of the transmitted light.
Technical parameter
| Instrument Technical Parameters | |
| Measurement Range | 0～100g/L; |
| Measurement Unit | g/L and mg/L (selectable display modes); |
| Display | LCD; |
| Accuracy | ±1%FS; |
| Resolution | 0.01%; |
| Repeatability | ±1%; |
| Power Consumption | ≤15W; |
| Power Supply | 220V, 50/60Hz; |
| Analog Output | 4-20mA current signal isolated output, maximum load 750 ohms; |
| Dimensions | 231*208*120mm. |
Sensor Technical Parameters
| Material | 316 stainless steel; |
| Cable | Shielded cable; |
| Installation method | Submersible, pipeline insertion; |
| Dimensions | Ф50×96mm; |
| Medium pressure | ≤3bar; |
| Signal cable | 10M (standard); |
| Protection rating | IP68; |
| Operating temperature | -20～60℃. |
Technical characteristics
- Multi-beam RD measurement technology, compensating for the effects of ambient light, contamination, and component aging.
- Multi-point calibration ensures accuracy across a wide measurement range.
- Various variable outputs such as current and relays, along with intelligent system control.
- Configurable sensors with Utheisa Kong air purge devices, controlled by transmitters for self-cleaning.
- Multiple installation methods including submerged and pipeline insertion types.
Application feld
The SS-H4180 suspended solids and sludge concentration meter is widely used in water supply plants (sedimentation tanks), paper mills (pulp concentration), coal washing plants (sedimentation tanks), power plants (ash slurry sedimentation tanks), sewage treatment plants (inlet/outlet, aeration tanks, return sludge, primary sedimentation tanks, secondary sedimentation tanks, thickening tanks, sludge dehydration), etc.
Hot Tags: Suspended Solids and Sludge Concentration Meter, China Suspended Solids and Sludge Concentration Meter manufacturers, factory, soil meters, ph meter controller, ph meter fermentation, oxygen water level, electronic ph tester for aquarium, portable conductivity
