Working Principle Of Gas Monitoring

Apr 11, 2025|

The working principle of gas monitoring mainly includes the following technologies: catalytic combustion technology, semiconductor technology, electrochemical technology,gas chromatography and infrared technology. ‌

Catalytic combustion technology
The catalytic combustion gas detector works on the principle of Wheatstone bridge. Its core components include detection elements and compensation elements, which are paired to form one arm of the bridge. When encountering flammable gas, flameless combustion will occur on the surface of the sensitive body of the detection element, causing the temperature of the sensitive body to rise, the resistance of the temperature-sensitive material to increase, and then cause the output voltage of the bridge to increase. The change in this voltage is proportional to the gas concentration. By measuring the change in the output signal of the bridge, the concentration of the detected gas can be determined. This technology has the advantages of good output signal linearity, high reliability, affordable price and no cross-interference with other non-combustible gases. ‌

Semiconductor technology
The semiconductor gas detector uses the adsorption of the measured gas to change the conductivity of the semiconductor and excites the alarm circuit by comparing the current change. Because semiconductor sensors are sensitive to environmental influences, their output linearity is not stable enough. However, due to their high response sensitivity, semiconductor sensors have been widely used in measuring gas micro-leakage phenomena. ‌
Electrochemical technology
Electrochemical gas detectors generate electrical signals proportional to the gas concentration by reacting the sensor with the gas being measured. The gas being measured contacts the sensor through a tiny opening, passes through a hydrophobic barrier to reach the electrode surface, and reacts with the sensing electrode to form an electrical signal. This technology has the advantages of low power consumption, good linearity and repeatability, long life, good selectivity and high sensitivity. It is one of the most common and mature detection technologies in the laboratory field.

Gas chromatography
Gas chromatography separates the components in a gas sample and utilizes a detector to perform quantitative analysis of the separated components, featuring high resolution and high sensitivity.The HH-6200 Online VOCs Monitoring System employs this very method.

Infrared technology
Infrared gas detectors work based on the Lambert-Beer law. When a beam of parallel monochromatic light passes vertically through a uniform non-scattering absorbing substance, its absorbance is proportional to the concentration of the absorbing substance and the thickness of the absorption layer. Infrared gas detectors calculate gas concentrations by sending infrared light to the gas to be measured and detecting the change in light intensity of the beam after passing through the gas. This technology has the advantages of high sensitivity, wide measurement range, and applicability to the detection of a variety of gases. It is widely used in the detection of gases such as methane, carbon dioxide, nitrogen dioxide, carbon monoxide, sulfur dioxide, ammonia, ethanol, and benzene.

Send Inquiry