Online Ambient Air Quality Monitoring System Installation Requirements
Oct 22, 2025| 1. Foundation requirements
The online ambient air quality monitoring system requires a solid concrete foundation at the construction site. If no concrete foundation is available, it is recommended to construct a 80cm x 80cm x 20cm concrete pier to support the equipment.
2. Power requirements
The online ambient air quality monitoring system requires 220V/50HZ AC power to operate properly. It is recommended to install a 220V power supply near the construction site and properly set up the power cable.
3. Network requirements
The online ambient air quality monitoring system supports two data transmission modes: wired network and wireless network (36/4G). The device is standard equipped with 3G wireless network. For construction units requiring high real-time network performance, it is recommended to install a wired network with a bandwidth of at least 4M on the construction site and complete the broadband line setup to meet the demand for high-quality data services.
4.Site Selection Requirements
Installation site selection must meet the following requirements: Monitoring points for online systems should be located within the fenced perimeter of construction zones. Considering both construction supervision and key access points, locations should be chosen that allow direct real-time observation of construction activities, safety management operations, and vehicle washing procedures at entry/exit points. These monitoring points should be established within a 5-meter safety buffer zone from construction barriers. When setting up multiple monitoring points, it is recommended to position them at different vehicle entry/exit points to ensure comprehensive coverage. When adjacent to other construction sites, avoid setting up monitoring points at the adjacent boundary. The distance between the monitoring point fence and any reflective surface should be greater than 3.5m.
5.Safety requirements
A standard protective barrier should be set up to ensure the safety of the online ambient air quality monitoring system at a distance of at least 2 meters, and the responsible person should be clearly responsible for monitoring the safety and anti-theft management of the equipment.
6. Personnel Requirements
Due to the large weight of the the online ambient air quality monitoring system, at least two people are required to install the equipment on the construction site, and it is recommended that the staff wear safety helmets to work safely.

FAQ
Q1:Where is your company?
A1:No.8 Guangdian Road,Development Zone,Nantong City,Jiangsu Province.
Q2:What are your main products?
A2:Huihuan has water quality monitorings and gas analyzers.water quality monitorings include volatile phenol analyzer,total zinc analyzer,total lead analyzer,total chromium analyzer,total cadmium analyzer,total arsenic analyzer,sulfde analyzer,cyanide analyzer,carbon oxygen demand MN analyzer,carbon oxygen demand CR analyzer,handheld electrode-type water quality detector,SS-H4180 suspended solidssludge concentration meter,online hardness tester for water quality,total organic carbon analyzer,ammonium nitrogen analyzer,total phosphorus analyzer,total nitrogen analyzer,hexavalent chromium analyzer,automatic water sampler,water quality automatic monitoring station,monitoring analyzer for surface water,multi parameter water quality analyzer,five parameter online monitoring instruments,residual chlorine meter,dissolved oxygen,
conductivity meter,PH meter,turbidity meter and so on. Gas analyzers include cems analyzer,carbon dioxide analyzer,ammonia gas analyzer,online VOCs monitoring system,online ambient air quality monitoring system and so on.

